The laser source used for laser fabric cutting machines.
Contact
Product code : GT-LSPOWER
Views : 94
Enter the quantity. :
CONTACT IN HANOI
Hotline : 0961230808 exit 1
Email : giangthanh@maymaygiangthanh.com
CONTACT IN HCM
Hotline : 0961230808 exit 3
Email : hcm@maymaygiangthanh.com
The laser source is used for cutting machines with CO2 lasers ranging in power from 60W to 80W.
The laser source for cutting machines with CO2 lasers ranging in power from 60W to 80W can be used for various applications such as cutting acrylic, leather, mica, and more.
Technical specifications:
| Input Voltage | Input Voltage | AC220V or AC110V (to be specified when ordering) | |
| AC Frequency | 47 --- 440Hz | ||
| Current Leakage | ≤60A (AC220V input) | ≤30A (AC110V input) | |
| Ground Resistance | ≤0.7mA (AC220V input) | ≤0.4mA (AC110V input) | |
| Output Voltage | Output Voltage | DC 40KV | |
| Output Current | DC 28 mA | ||
| Efficiency | ≥90% (rated) | ||
| MTBF | ≥10000 hours | ||
| Response Time | ≤1mS (for current output rise to 90% of rated signal at current switching threshold) | ||
| Control Interface | TTL level control, effective high and low levels, selectable (refer to Terminal control mode) | ||
| Isolation | Input-output, input-earth: AC1500V 10mA for 60s, insulation resistance connected to output terminals and frame | ||
| Protection | It may fail in a short time (requires the supplier to have a fuse and avoid optical coupling between positive and chassis). | ||
| Environment | Operating temperature (-10 ~ 40) °C, relative humidity: ≤90% | ||
| Cooling Method | Forced air cooling | ||
| Dimensions | L × W × H = 280 * 173 * 97 (mm) | ||
